News & Events

Upcoming Events

AED Summit

Start Date: January 17, 2022

End Date: January 19, 2022

Disney Coronado Springs Resort
1000 W Buena Vista Dr.
Lake Buena Vista, FL 32836

NCBA (National Cattlemen’s Beef Assoc.) Booth #1643

Start Date: February 1, 2022

End Date: February 3, 2022

George R. Brown Convention Center
1001 Avenida De Las Americas
Houston, TX 77010

ISRI (Institute of Scrap Recycling) Show

Start Date: March 21, 2022

End Date: March 24, 2022

Mandalay Bay Resort
3950 Las Vegas Blvd S
Las Vegas, NV 89119

NHES (National Heavy Equipment Show)

Start Date: March 31, 2022

End Date: April 1, 2022

The International Centre
6900 Airport Rd
Mississauga, ON L4V 1E8
Canada

World of Asphalt

Start Date: March 29, 2022

End Date: March 31, 2022

Nashville Music City Center
201 Fifth Avenue South
Nashville, TN 37203
Booth #1462

Waste Expo

Start Date: May 9, 2022

End Date: May 12, 2022

Las Vegas Convention Center
West Hall
3150 Paradise Rd
Las Vegas, NV 89109

SIMA Snow & Ice Show

Start Date: June 21, 2022

End Date: June 24, 2022

Wisconsin Convention Center
400 W Wisconsin Ave
Milwaukee, WI 53203

CONEXPO CON/AGG 2023

Start Date: March 14, 2023

End Date: March 18, 2023

Las Vegas Convention Center
3150 Paradise Rd
Las Vegas, NV 89109

Hyundai Collaboration with Cummins – Results in New A Series Wheel Loaders, Excavators

Hyundai Collaboration with Cummins – Results in New A Series Wheel Loaders, Excavators

March 25, 2020 | Corporate News

NORCROSS, GA (March 25, 2020) –At CONEXPO-CON/AGG 2020 Hyundai Construction Equipment Americas introduced wheel loader and excavator models from its new A Series, all of which feature new generation Cummins Performance Series diesel engines that achieve compliance with international Stage 5 emissions-control standards. A full range of wheel loaders and excavators in its two exhibits – N11601 (indoor) and F6914 (outdoor) were on display.

“Hyundai is pleased to collaborate with Cummins in the introduction of our A Series wheel loaders and excavators,” said Stan Park, Vice President of Distribution and Marketing, Hyundai Construction Equipment Americas. “The Cummins Performance Series engines, combined with the engineering and product design expertise of Hyundai, will enable our customers to achieve substantial performance gains from a smaller, lighter power package. Customers will experience more than a 10-percent increase in power and a nearly 20-percent increase in torque compared to previous engines, all while using less fuel.”

Three new A Series models – the Hyundai HL930A wheel loader, HX210A crawler excavator, and HX85A compact excavator – make their debuts at this year’s show, along with several upgraded models that join the A Series lineup.

The new Hyundai HX210A features similar general specifications to those found in the HX220L model, but with standard features and pricing designed to appeal to rental houses and dealers with high volumes of rental business.

The HX210A excavator is powered by a 170-hp (127-kW) Cummins B4.5 Stage 5/Tier 4 Final diesel engine. The excavator has a standard operating weight of 48,720 lbs (22,100 kg). The HX210A excavator is equipped with a standard .80-yd3 (1.3-m3) capacity bucket.

Prototype remote-control wheel loader

A Hyundai HL960A wheel loader – an A Series upgrade of the HL960 model – demonstrates a prototype remote-control system, enabling the machine to be operated from any appropriately technology-enabled remote site. Hyundai expects the remote-control wheel loader to find use in severe or hazardous-duty applications, where a human operator could be exposed to danger.

Stage 5-compliant engines also meet Tier 4 Final requirements

While Stage 5 guidelines do not apply in the United States, the Cummins Performance Series engines featured in Hyundai’s A Series models also satisfy Tier 4 Final emissions control requirements.

The Stage 5-compliant Cummins Performance Series engines integrate the newest after treatment system – the Single Module™ – with leading combustion and air-handling technology to be Exhaust Gas Recirculation (EGR)-free. These engines offer a simpler installation with lower installed costs.

The Single Module system combines a Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR) and urea-dosing technologies in one unit, providing up to a 50-percent reduction in envelope size and a 30-percent reduction in weight compared with earlier models. Cummins Performance Series engines are capable of removing emissions almost entirely by passive regeneration, with no impact on equipment operation and without any operator interface or intervention.

Facebook Social Share Twitter Social Share LinkedIn social Share Email share
Hyundai Construction Equipment Americas Names Top 2021 Dealers

January 20, 2022 | Corporate News

Hyundai Construction Equipment Americas Names Top 2021 Dealers

NORCROSS, Ga. (Jan. 20, 2022) – At an event held in conjunction with this year’s Associated Equipment Distributors meeting, Hyundai Construction Equipment Americas, Inc., recognized NED (National Equipment Dealers) as its top dealer of 2021. NED, through the recent merger of Four Seasons Equipment, May Heavy Equipment, Rob’s Hydraulics Inc., Grove River Equipment and Earthmovers Equipment, serves customers across the […]

Hyundai and First Choice Farm & Lawn Support Tornado Cleanup Efforts in Tennessee

January 4, 2022 | Corporate News

Hyundai and First Choice Farm & Lawn Support Tornado Cleanup Efforts in Tennessee

NORCROSS, Ga. (Jan. 4, 2022) – Hyundai Construction Equipment Americas, Inc. partnered with First Choice Farm & Lawn, one of its dealers, headquartered in Union City, Tenn., to assist with cleanup efforts in nearby Samburg, Tenn., which incurred heavy tornado damage from the same series of December storms that left devastation across six states and killed […]

Back to News & Events